English
Français
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
China Brand New Mitsu-Bishi Mr-J2s-70A Digital AC-Servo Amplifier for Rated Motor Power up to 750W Good Price - China Brand New Mitsu-Bishi Servo Drive, Mitsu-B
Introduction to Mitsubishi servo MR-J2S-70A servo amplifier: Rated output voltage: three-phase ac170v Output rated curre
Description
Basic Info
| Model NO. | MR-J2S-70A |
| Link of Transformation | AC-DC-AC Variable-Frequency Drive |
| Nature of DC Power | Current Variable-Frequency Drive |
| Function | Constant Torque Universal Type |
| Brand | Mitsubishi |
| Transport Package | Carton |
| Specification | 750W 220V |
| Trademark | Mitsu-bishi |
| Origin | Japan |
Product Description
Introduction to Mitsubishi servo MR-J2S-70A servo amplifier:Rated output voltage: three-phase ac170v
Output rated current: 1.1a
Power input voltage and frequency (*1): three-phase or single-phase ac200v ~ 240V, 50hz/60hz
Input rated current: 0.9A
Input allowable frequency variation: ± 5%
Power supply for interface: dc24v+-10% (necessary current capacity: 0.3A)
Control mode: sine wave PWM control, current control mode
Allowable regenerative power of built-in regenerative resistor in servo amplifier (* Note 2, 3): None
Dynamic brake: built in (* Note 4)
Communication function: USB connected to personal computer, etc. (corresponding to Mr configurator2)
Encoder output pulse: corresponding (ABZ phase pulse)
Analog quantity monitor: 2CH
1 * input pulse frequency: 4mpps (differential pulse) 200kpps (when the collector is open circuit)
2 positioning feedback pulse: encoder resolution (resolution of servo motor per revolution): 131072pulses/rev
3. Command pulse magnification: electronic gear a/b times a=1~16777215 b=1~ 4 excessive error: + - 3 turns
5 torque limit: parameter setting or external analog input setting (dc0v~+-10v/* torque)
Mitsubishi servo mr-je-10a speed control mode:
1 speed control range: analog speed command 1:2000 internal speed command 1:5000
2. Analog speed command input: dc0v ~ 10v/ rated speed (the speed at 10V can be changed with [pr.pc12])
3. Speed variation rate: +- 0.01% (load variation: 0% ~ 100%), 0% (power variation: +- 10%)
Under +- 0.2% (ambient temperature: 25 +- 10) common limit analog quantity speed command
4 torque limit: parameter setting or external analog input setting (dc0v~+10v/* torque)
Mitsubishi servo MR-J2S-70A torque control mode:
1. Analog torque command input: DCV ~ + - 8v/* torque (input impedance: 10K ~ 12K Ω)
2 speed limit: parameter setting or external analog input setting (dc0v~+-10v/ rated speed)
Mitsubishi servo MR-J2S-70A protection grade: self cooling open (IP20)
Mitsubishi servo MR-J2S-70A weight: 0.8kg
Our Contact
Send now
